Description
Mundorf Resistor 8R2 Ohm 10W MR10 Series
In comparison to cement resistors, metal-oxide film resistors do not have any residual inductivity. This is the reason why metal oxide film resistors should be favoured whenever impulse speed is required, e.g. in the medium/high frequency range. The versions that are offered have a continuous load capacity of two and a half, five or ten watt. In the impulse range, however, they are much higher continuous load capacity.
Specifications:
| Resistance | 8,2 Ohm ±2 % |
| Wattage | 10 Watt |
| Dimensions | Ø8xL52 mm |
| Connectors | Ø0,80xL35 mm |
| Temperature Coefficient | ±300 ppm/°C |
| Inductivity | <0> |
| Dielectric Strength | 850 Volt AC |
| Temperature range | -55°C/-67°F…+200°C/+390°F |
| Conductor Material | Metal oxide |
| Core| Potting | Ceramics| Cement |
Reviews
There are no reviews yet.